Hydrophilic Guide Wire
It is specifically designed for use within the peripheral vascular system to allow easier device placement during diagnostic and interventional procedures.
- Hydrophilic coating provides excellent lubricity;
- Super elastic nitinol wire core for kink resistance prevents guide wire from kink;
- Full length tapered core design for excellent torque transmission and flexibility;
- Special polymer coating provides good radiopaque performance.
| Product No. | Diameter | Length(cm) | Shaft Stiffness | Tip form |
| 42.01.10142 | 0.032" | 150 | Standard | Straight |
| 42.01.10172 | 0.032" | 150 | Standard | Angled |
| 42.01.10143 | 0.032" | 180 | Standard | Straight |
| 42.01.10173 | 0.032" | 180 | Standard | Angled |
| 42.01.10145 | 0.032" | 260 | Standard | Straight |
| 42.01.10175 | 0.032" | 260 | Standard | Angled |
| 42.01.10148 | 0.035" | 150 | Standard | Straight |
| 42.01.10178 | 0.035" | 150 | Standard | Angled |
| 42.01.10149 | 0.035" | 180 | Standard | Straight |
| 42.01.10179 | 0.035" | 180 | Standard | Angled |
| 42.01.10232 | 0.035" | 180 | Standard | |
| 42.01.10151 | 0.035" | 260 | Standard | Straight |
| 42.01.10181 | 0.035" | 260 | Standard | Angled |
| 42.01.10234 | 0.035" | 260 | Standard | |
| 42.01.10154 | 0.038" | 150 | Standard | Straight |
| 42.01.10184 | 0.038" | 150 | Standard | Angled |
| 42.01.10237 | 0.038" | 150 | Standard | |
| 42.01.10155 | 0.038" | 180 | Standard | Straight |
| 42.01.10185 | 0.038" | 180 | Standard | Angled |
| 42.01.10238 | 0.038" | 180 | Standard | |
| 42.01.10157 | 0.038" | 260 | Standard | Straight |
| 42.01.10187 | 0.038" | 260 | Standard | Angled |
| 42.01.10240 | 0.038" | 260 | Standard |
Stainless Steel Guide Wires
The guidewire is intended for percutaneous access to peripheral vasculature. It may be used to selectively introduce and place catheters and other interventional devices into the peripheral vasculature. The device should only be used by physicians trained in percutaneous, intravascular techniques and procedures.
- Wire Coil: Stainless Steel
- Standard fixed core
- Coating: None
| 0.032" |
Product No. 0.035" |
0.038" | Length (CM) | Tip form |
| 42.01.60000 | 42.01.60002 | 42.01.60004 | 45 | Straight |
| 42.01.60001 | 42.01.60003 | 42.01.60005 | 45 | J |
| 42.01.60006 | 42.01.60008 | 42.01.60010 | 60 | Straight |
| 42.01.60007 | 42.01.60009 | 42.01.60011 | 60 | J |
| 42.01.60012 | 42.01.60014 | 42.01.60016 | 70 | Straight |
| 42.01.60013 | 42.01.60015 | 42.01.60017 | 70 | J |
| 42.01.60018 | 42.01.60020 | 42.01.60022 | 150 | Straight |
| 42.01.60019 | 42.01.60021 | 42.01.60023 | 150 | J |
Hemostasis Valve Sets
The hemostasis valve set is designed to connect/insert a catheter/guidewire to facilitate the performance of surgery. The hemostasis valve is designed to be used as a conduit when interventional devices are inserted into the human vascular system. The guidewire insertion tool is used to facilitate the introduction of a guidewire into the hemostasis valve. It consists of an austenitic stainless steel tube connected to a hub made of polycarbonate. The torque device is used to manipulate the guidance of a guidewire in vascular territories.
- Pressure resistance and good sealing valve to reduce blood loss
- Various types to suit clinician's habits - 4 types are available, 2 main types are unique in China
- 1）Double PTCA type: innovative operation (allows operator to insert two PTCA balloons or one balloon and one piece at the same time).
- 2）Push-pull type (press to close and press to open).
- 3）Another main type: a special Y valve customized for neurosurgeons (unique in China), has a short appearance of 2-3cm, popular among neurosurgeons. In the past, the Y valves used in neurosurgery department were from cardiac surgery and then replaced by doctors. This customized type saves surgery time and increases comfort.
| Product No. | Description |
| 42.03.10000 | Twist Y Connector |
| 42.03.10001 | Push Pull Y connector |
| 42.03.10004 | Y Click type |
| 42.03.10005 | Twist Y connector with 25cm extension line and stopcocks |
| 42.03.10002 | Push Pull Y connector with 25cm extension line and stopcocks |
| 42.03.10006 | Y Click type with 25cm extension line and stopcocks |
| 42.03.10003 | Push Pull Y connector with 45cm extension line and stopcocks |
| 42.03.10012 | Y Click type with 45cm extension line and stopcocks |
| 42.03.10053 | Hemostasis Valve Set (two valves) |
| 42.03.10054 | Push pull with Green |
Transradial Access Sets for Intervention
The transradial introducer set is intended for the introduction of balloons, diagnostic and interventional catheters or other devices in radial artery access procedures.
- Wire Coil: Stainless Steel
- Standard fixed core
- Coating: None
|
Click TYPE- Ter II Nitinol core with SS spring core guidewire included |
||||
| Product No. | Size(Fr.) | Length(cm) | Nitinol Guidewire | Introducer Needle |
| 42.10.20205 | 5 | 7 | 0.018"*45cm Straight | 21G*4.0cm |
| 42.10.20206 | 5 | 10 | 0.018"*45cm Straight | 21G*4.0cm |
| 42.10.20207 | 5 | 11 | 0.018"*45cm Straight | 21G*4.0cm |
| 42.10.20209 | 6 | 7 | 0.018"*45cm Straight | 21G*4.0cm |
| 42.10.20210 | 6 | 10 | 0.018"*45cm Straight | 21G*4.0cm |
| 42.10.20192 | 6 | 11 | 0.018"*45cm Straight | 21G*4.0cm |
| 42.10.20212 | 7 | 7 | 0.018"*45cm Straight | 21G*4.0cm |
| 42.10.20213 | 7 | 10 | 0.018"*45cm Straight | 21G*4.0cm |
| 42.10.20214 | 7 | 11 | 0.018"*45cm Straight | 21G*4.0cm |
Catalog
If you want to examine the product in detail, you can download the PDF catalog, and for your questions, you can reach us from our Contact Us page.
